• 

  ນະວັດຕະກໍາຂອງເຕົາເຜົາປູນຂາວ PFR

  PFR Lime Kiln has been developed after an investigation of several experiments and practical encounters. Incorporating fluidized bed and mixed feed technology, this ຂະ​ບວນ​ການ​ປູກ​ປູນ​ຂາວ​ໃສ່ calcination​ advanced kiln produces best quality lime. PFR Lime Kiln differs from conventional lime kilns in that it has a unique system to transfer the catalytic heat, produced during burning of the (highly reactive) quicklime to reheat and reactivate burned lime. Unique PFR Lime Kiln design results in consistent and reliable quality of final product.

• 

  ມາດຕະການຄວາມປອດໄພຂອງເຕົາເຜົາປູນຂາວ PFR

  Since it is possible to have all the necessary safety features in a full-fledge PFR Lime Kiln, this should not be an issue at all and that must always get preference than getting more lime out of kiln. These emergency shutdown mechanisms are part of their segregated safety systems, as well as inert gas injection and the most advanced fire detection and suppression systems available. This ໂຮງງານປູນຂາວ combination of safety protocols and strict operating procedures make PFR Lime Kiln a genuinely safe technology for lime production.

• 

  ການດໍາເນີນງານຂອງການນໍາໃຊ້ເຕົາເຜົາປູນຂາວ PFR

  LimeKiln is highly effective in working towards creating the best possible lime for myriad industries. The lime produced from PFR Lime Kiln is used in various industries such as agriculture, construction industry, iron and steel manufacturing process etc. In addition, this ໂຮງງານປຸງແຕ່ງປູນຂາວ technology is extremely important for the production of lime used in flue gas treatment and reduces environmental damage from industrial emissions.

ເປັນຫຍັງຕ້ອງເລືອກ Cement International Engineering Pfr lime kiln?

• ເຕົາເຜົາປູນຂາວທີ່ມີຄຸນນະພາບທີ່ມີການຢັ້ງຢືນ CE ແລະ ISO

  ສໍາລັບເວລາດົນນານ, AGICO ໄດ້ມີທີມງານດ້ານວິຊາການມືອາຊີບ, ເຕັກໂນໂລຢີການຜະລິດທີ່ແກ່ຍາວ, ແລະປະສົບການການຜະລິດທີ່ອຸດົມສົມບູນ, ການສ້າງລະບົບການຄຸ້ມຄອງເຕັກໂນໂລຢີການຜະລິດເຕົາເຜົາທີ່ສົມບູນ, ເຮັດໃຫ້ເຕັກໂນໂລຢີເຕົາເຜົາປູນຂາວທີ່ປະຫຍັດພະລັງງານແລະປົກປ້ອງສິ່ງແວດລ້ອມທີ່ສົມບູນແບບ. ເຕັກໂນໂລຢີແມ່ນເຕົາເຜົາປູນຂາວ Pfr ໂດຍການລົງທຶນຫນ້ອຍທີ່ສຸດ, ອັດຕະໂນມັດລະດັບສູງ, ແລະຄຸນນະພາບສູງຂອງຜະລິດຕະພັນ. ນອກຈາກນັ້ນ, ມີການບໍລິໂພກພະລັງງານຕ່ໍາເຊັ່ນດຽວກັນກັບຊີວິດການບໍລິການ furnace ຍາວ. ມັນໄດ້ຖືກນໍາໃຊ້ຢ່າງກວ້າງຂວາງໂລຫະໂລຫະ, ໂລຫະ nonferrous, ສານເຄມີ, ຜະລິດຕະພັນການກໍ່ສ້າງ, ພາກສ່ວນອື່ນໆ, ເຊັ່ນ: ການປຸງແຕ່ງເລິກແລະອຸດສາຫະກໍາອື່ນໆ.

• ສະຫນອງການແກ້ໄຂທີ່ສົມບູນແບບແລະການບໍລິການທີ່ເອົາໃຈໃສ່

  AGICO ໂຮງງານຜະລິດປູນຂາວ Pfr ດ້ານວິຊາການທີ່ມີຄວາມຊໍານິຊໍານານສູງທີ່ຊ່ຽວຊານໂຄງການ EPC Turnkey, ລວມທັງການຜະລິດ, ການຕິດຕັ້ງການອອກແບບ. AGICO ໃຫ້ບໍລິການດ້ານການຂາຍກ່ອນການຂາຍແບບເຕັມຮູບແບບ, ເຊັ່ນດຽວກັນກັບການຊ່ວຍເຫຼືອດ້ານວິຊາການຫລັງການຂາຍ.

• ຜູ້ຜະລິດເຕົາເຜົາປູນຂາວແບບມືອາຊີບ

  ບໍລິສັດສ່ວນໃຫຍ່ໄດ້ປະຕິບັດການອອກແບບໂຄງການການອອກແບບວິສະວະກໍາ, ການສະຫນອງອຸປະກອນພິເສດເຊັ່ນດຽວກັນກັບການຕິດຕັ້ງແລະການແຕ່ງຕັ້ງພະນັກງານການຝຶກອົບຮົມ, ການບໍລິການເຕົາອົບເລີ່ມຕົ້ນ furnaces, ເຊັ່ນດຽວກັນກັບເຕົາເຜົາປູນຂາວ Pfr ຂອງການປະຫຍັດພະລັງງານຂອງເຕົາເຜົາປູນຂາວເປັນມິດກັບສິ່ງແວດລ້ອມ. ບໍ​ລິ​ສັດ​ໄດ້​ຮັບ​ການ​ກໍ່​ສ້າງ activated kilns ປະ​ລິ​ມານ​ຕ່າງໆ​ທີ່​ປະ​ກອບ​ມີ 150m3, 170m3, 250m3,350m3, ແລະ​ອື່ນໆ. ເປີດ​ສົບ​ຜົນ​ສໍາ​ເລັດ​ຜົນ​ຜະ​ລິດ stunning! ການນໍາໃຊ້ເຕັກໂນໂລຢີກ້າວຫນ້າຂອງເຕົາເຜົາຖ່ານຫີນ coke lime shaft ອາຍແກັສໄດ້ຖືກອອກແບບ, ແລະສັນຍາສັນຍາໄດ້ຮັບການລົງນາມກັບຫຼາຍໆບໍລິສັດ.

• ໃຫ້ເຕົາເຜົາປູນຂາວທີ່ມີຄຸນນະພາບສູງດ້ວຍເຕັກໂນໂລຢີໃຫມ່

  ໃນໄລຍະ 20 ປີທີ່ຜ່ານມາ, ໄດ້ມຸ່ງຫມັ້ນທີ່ຈະພັດທະນາ, ການຄົ້ນຄວ້າເຕົາເຜົາປູນຂາວ Pfr, ການຜະລິດການຕິດຕັ້ງເຕົາເຜົາປູນຂາວປົກປັກຮັກສາສິ່ງແວດລ້ອມແລະອັດຕະໂນມັດຢ່າງເຕັມສ່ວນ. ມັນ​ຍັງ​ມີ​ລາຍ​ຈ່າຍ​ຕ​່​ໍ​າ​, ການ​ບໍ​ລິ​ໂພກ​ພະ​ລັງ​ງານ​ຕ​່​ໍ​າ​. ພວກ​ເຮົາ​ແມ່ນ​ເປັນ​ທີ່​ເຊື່ອ​ຖື​ໄດ້​ສໍາ​ລັບ​ການ​ບໍ​ລິ​ການ​ທີ່​ມີ​ຄຸນ​ນະ​ພາບ​ສູງ​ສຸດ​ຂອງ​ພວກ​ເຮົາ​ແລະ flawless, ແລະ​ການ​ຜະ​ລິດ​ຕະ​ຫຼອດ​ຍາວ​ເຕົາ​ປູນ​.

ປະເພດຜະລິດຕະພັນທີ່ກ່ຽວຂ້ອງ

• ຖອກຫີນປູນ
• Calcination ຂອງປູນຂາວ
• ການ calcination ຫີນປູນ
• ການເຜົາຜານປູນຂາວ
• ການຜະລິດປູນຂາວ
• ເຕົາເຜົາ rotary ຫີນປູນ
• ເຕົາເຜົາ rotary ປູນຂາວ
• Rotary kiln ປູນຂາວ
• ເຕົາເຜົາ Shaft
• ພືດ calcination ປູນຂາວ

ການນໍາໃຊ້ເຕົາເຜົາປູນຂາວ PFR

PFR Lime KilnThe PFR lime kiln has a relatively simple operation. The limestone enters on a vertical angle from the top of the kiln and is fed down towards to bottom. The limestone, upon heating to somewhere around 900°C turns into quicklime. Hot air is then used to convey the hot quicklime dust out of the slaking unit and into a cooling cyclone, where it cools back down to room temperature. This ການຜະລິດປູນຂາວຈາກຫີນປູນ produces the final lime product is then harvested and prepared for transport.

---

ມາດຕະຖານການບໍລິການແລະຄຸນນະພາບ PFR Lime Kiln

Installation, Commissioning and After-Sales Support Everyone knows that the most important step in working with a new technology is to select proven partners at every link of the ໂຮງງານປຸງແຕ່ງຫີນປູນ value chain. lime kiln provides complete technical support PFR Lime KilnThe whole rang... Enabling your plant to operate at full capacity continuously with high quality lime production. PFR Lime Kiln is tested for further quality and the product that finally reaches to you prevail in strict adherence with set industry benchmarks.

---

ຄໍາຮ້ອງສະຫມັກຂອງ PFR Lime Kiln

PFR Lime Kilns are known for their versatility across hundreds of applications and industries This lime serves as a soil amendment for the agriculture industry, balancing pH levels in soil and helping crops absorb vital nutrients. Additionally, PFR Lime Kilns is used in construction industry for making lime which can be further utilized to make concrete and mortar. Lime produced in these kilns serves as a fluxing agent and is used to remove impurities during the steelmaking process. PFR Lime Kilns lime is additionally utilized in waste treatment where it ຂະບວນການຜະລິດປູນຂາວ is employed to stabilize and neutralize hazardous wastes.

ບໍ່ພົບສິ່ງທີ່ທ່ານກໍາລັງຊອກຫາບໍ?
ຕິດຕໍ່ທີ່ປຶກສາຂອງພວກເຮົາສໍາລັບຜະລິດຕະພັນທີ່ມີຢູ່ເພີ່ມເຕີມ.

ຂໍໃບສະເໜີລາຄາດຽວນີ້